Shijiazhuang Anhua Metal Wire Mesh Products Co.,Ltd.
+86-318-7758797
- Chain Link Gabion
- Sack Gabion
- Gabion Baskets
- Hexagonal Gabion
- Welded Gabion
- Gabion Box
- Ecological Gabion
- Gabions
- Reno Mattress
- Reinforced Gabion
NewsHome >> News >> Gabion before the weaving required conditions?
Gabion before the weaving required conditions? |
| 2011-9-26 |
| (1) All conductors (including the manufacture of gabion wire mesh, binding wire) the tensile strength of not less than 515MPa. (2): at least thirty centimeters sample elongation, elongation not less than 12%. (3) galvanized steel wire and galvanized volume size error (4) zinc coating adhesion requirements: When the diameter galvanized steel wire rod line about four times after 6 weeks of his fingers, where zinc coating peeled friction, cracking phenomenon. Outsourcing resin film (PVC): (1) not less than 2016MPa tensile strength. (2) elongation of not less than 200%. Gabion mesh: (1) the tensile strength of not less than 4213kN / m. (2) Anti-Shear strength of not less than 2316kN / m. (3) side wire bonding strength of not less than 1715kN / m. Cage assembly are: (1) complete the delivery of gabion unit go to the construction site. Each piece of construction workers, to ensure that the erection of the first film in the exact location. (2) binding the corner stone cage, binding can be bundled wire or four metal buckle. (3) using binding wire or metal pads and buckle the mesh. |
